Xantrex MS2000 Manual do Utilizador Página 25

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 24
Introduction
975-0125-02-01 17
MS2000 Features
Front Panel Features
Before you begin to operate the MS2000, review the front panel features shown in
Figure 1-2 and described in Table 1-1. A detailed view of the lights and buttons on
the front panel is shown in Figure 1-3 and described in Table 1-2.
Figure 1-2
Front Panel of the MS2000
Table 1-1
Front Panel Features
Feature Description
1 AC wiring compartment access panel provides access to the terminal block for
wiring the AC input and AC output.
2 AC knockouts provide access for AC input and AC output wiring. A total of four
knockouts are provided on the unit: two on the front and one on each side (not
shown).
3 Mounting flanges are used for mounting the unit. A total of six flanges are
provided on the unit.
4 Fans are located on the top of the unit and the bottom of the unit.
Top external fan is an intake fan that activates when the internal temperature of
the inverter/charger increases. The fan speed varies with the internal temperature
and turns off when the inverter/charger cools down. (This internal temperature
may be caused by heat in the inverter/charger or by high ambient temperature.)
Bottom internal fan (not shown) is an exhaust fan and runs continuously if the
unit is inverting or charging.
2
3
2
1
2
4
2
3
Vista de página 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 125 126

Comentários a estes Manuais

Sem comentários